L1® Compact portable line array system TECHNICAL DATA SHEET Bose Professional Systems Division 1 OF 7 pro.Bose.com Key Features • High-performing, powered, portable two-way loudspeaker system with a 180° H x 40° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction • Articulated line array loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area—even off to the extreme sides • Curved array design provides 40° of vertical coverage• Integrated ToneMatch® presets contain hardwired equalization curves for dynamic handheld microphones and acoustic guitars • Lightweight, interlocking components for easy transport • Offers both collapsed and extended setup positions Product Overview The L1 Compact system is our smallest and most portable system for an audience of up to 100. It has a 6 speaker articulated line array, and it includes an integrated two-channel mixer with ToneMatch® presets on each channel. Carry it in one trip. Set it up in one minute. Fill the room with one system. Technical Specifications System Performance System Type Self powered, two-way Frequency Response (+/-3 dB)1 65 Hz - 14 kHz Frequency Range (-10 dB)1 50 Hz - 16 kHz Nominal Dispersion 180° H x 40° V Maximum SPL @ 1 m2 106 dB SPL (112 dB SPL peak) Crossover Frequency 400 Hz 4th order Butterworth Amplification System Power Rating 130 W Distortion at Rated Power 0.1 % Max (30 Hz - 15 kHz) System Limiter Dynamiclimiter Overload Protection Fuse/NTC Power Indicator Blue LEDsystem on Transducers Driver Compliment Array: Six (6) 2.00" (51 mm) HF drivers Power Stand: 8" (203 mm) LF driverChannel Signal Indicators Channel 1 Channel 2 Signal/clip LED: Green = signal present, Red = clip (limiter active) Signal/clip LED: Green = signal present, Red = clip (limiter active) ToneMatch Presets ToneMatch microphone equalization is always engaged on Channel 1and cannot be bypassed. Switch provides ToneMatch equalization only to the 1/4" input. This preset is designed for an acoustic guitar with a piezo pickup is engaged. Input XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-) 1/4" TS/TRS, 1∕8" TS/TRS, (2) RCA Channel Gain (1/4" input) N/A -Infinity to +40 dB Channel Gain (XLR input) -Infinity to + 50 dB N/A Channel Gain (1/8" input) N/A -Infinity to +24 dB Channel Gain (RCA input) N/A -Infinity to +24 dB Maximum Input Signal +8 dBu +12 dBu (each: 1/4", 1/8", RCA) Input Impedance 2.4 kΩ 1/4": 800 kΩ, 1/8": 14 kΩ, RCA: 12.5 kΩ Controls Volume, Treble (+/- 5 dB shelving filter @ 4 kHz), Bass (+/- 5 dB shelving filter @ 120 Hz) Volume Additional Connections Master Line Output 1/4" balanced TRS or unbalanced TS: Nominal +2.2 dBu, Max +20 dBu Record Out (2) RCA unbalanced: Nominal -3.8 dBu, Max +14 dBu AC Mains IEC ConnectorL1® Compact portable line array system TECHNICAL DATA SHEET Bose Professional Systems Division 2 OF 7 pro.Bose.com Physical Enclosure Power Stand: Polypropylene Extensions and Array: ABGrille Powder-coated perforated steel grille Dimensions Assembled height, collapsed position: 16.5" (418 mm) Assembled height, extended position: 78.5" (1995 mm) Net Weight Power Stand: 24.6 lb (11.2 kg) Extensions (each): 2.3 lb (1.1 kg) Shipping Weight Power Stand: 30.0 lb (13.8 kg) Extensions: 7.5 lb (3.4 kg) VoltagesUniversal AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max Footnotes: 1 Frequency response and range measured on-axis with recommended active EQ in an an echoic environment.2 Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression. These is use for commercial purpose(Like big Auditoriums, Gym, ETC)